Loading ...
Loading ...
Loading ...
COOKWARE CHARACTERISTICS
Copper • Heats very quickly and evenly.
Earthenware • Follow manufacturer's instructions.
• Use on low heat settings.
COOKWARE CHARACTERISTICS
Porcelain • See stainless steel or cast iron.
enamel-on-steel
or cast iron
Stainless steel
Heats quickly, but unevenly.
A core or base of aluminum or
copper on stainless steel provides
even heating.
ELECTRONICOVENCONTROL
2
)
SELF-CLEANING OVEN
1. Convection Selector
2. Display
3. Timer
6 7 8 9 10 11 12
4. Clock 7. Temperature Selector 10. Minute
5. Manual Oven Light 8. Timed Cooking 11. Start
6. Oven Selector 9. Hour 12. Off
When power is first supplied to the appliance, everything on the
display will light up for 1 to 2 seconds, then "PF" will appear.
Press OFF to clear.
Any other time "PF" appears, a power failure occurred. Press
OFF and reset the clock if needed.
When the oven is in use, the display shows preheat time and the
temperature and oven setting.
When the oven is not in use, the display shows the time of day.
If "Err" appears on the display, an invalid pad was pressed.
Press OFF and retry your entry.
This is a 12 hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven, Timer and Timed Cooking
are off.
1. Press CLOCK.
2. Press the HR or MIN "up" or "down" arrow pads to set the
time of day.
3. Press CLOCK or START.
The START pad begins any oven function except the Timer. Ifnot
pressed within 5 seconds after pressing a pad, "START?" will
appear on the display as a reminder. If not pressed within 5
minutes after pressing a pad, the oven display will return to the
time of day mode and the programmed function will be
cancelled.
The OFF pad stops any function except the Clock, Timer and
Control Lock.
Tones are audible signals, indicating the following:
One tone
• Valid pad press
• Oven is preheated
• Function has been entered
Three tones
• Invalid pad press
Four tones
• End-of-cycle
• Reminder, repeating each minute after the end-of-cycle tones
Loading ...
Loading ...
Loading ...