Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 16 ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 17
Inno Pocket Roll Operation
Show Mode: This mode allows either a single unit or several units
linked together, to run one of 12 shows that you choose. Show mode
can run with or without sound active mode.
1. Press the MENU button until “SHND” is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until you nd your desired show,
press ENTER, then press and hold the MENU button for at least 3
seconds to activate. After you have set your desired show, it can
be changed at any time using the UP or DOWN buttons.
Inno Pocket Roll DMX Traits and Values
Channel Value Function
1 0 - 255 PAN
2 TILT
0 - 9 STOP
10 - 120 CLOCKWISE ROLL FAST - SLOW
121 - 134 STOP
135 - 245 COUNTER CLOCKWIS SLOW - FAST
246 - 255 STOP
3 STROBE
0 - 7 BLACKOUT
8 - 15 OPEN
16 - 131 STROBING SLOW - FAST
132 - 139 OPEN
140 - 181 SLOW OPEN - FAST CLOSE
182 - 189 OPEN
190 - 231 FAST OPEN - SLOW CLOSE
232 - 239 OPEN
240 - 247 RANDOM STROBE
248 - 255 OPEN
4 COLOR WHEEL
0 - 7 OPEN
8 - 14 GOBO 1 YELLOW
15 - 21 GOBO 2 RED
22 - 28 GOBO 3 GREEN
29 - 35 GOBO 4 BLUE
36 - 42 GOBO 5 RGB
43 - 49 GOBO 6 UV
50 - 56 GOBO 7 LIGHT BLUE
57 - 63 GOBO 8 UV & LIGHT BLUE
64 - 71 OPEN SHAKE
72 - 78 GOBO 1 YELLOW SHAKE
79 - 85 GOBO 2 RED SHAKE
86 - 92 GOBO 3 GREEN SHAKE
93 - 99 GOBO 4 BLUE SHAKE
100 - 106 GOBO 5 RGB SHAKE
107 - 113 GOBO 6 UV SHAKE
114 - 120 GOBO 7 LIGHT BLUE SHAKE
121 - 127 GOBO 8 UV & LIGHT BLUE SHAKE
Master-Slave Conguration This function will allow you to link up
to 16 units together and operate without a controller. The units will be
sound activated. In a Master-Slave set up, one unit will act as the con-
trolling unit and the others will react to the controlling units programs.
Any unit can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The rst unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. Set the Master unit to your desired operating mode.
3. On the slave units tap the MENU button until “SLND” is dis-
played, and Press ENTER. Choose either “SL 1” or “SL 2” and
press ENTER. See page 9 for more info.
4. The slave units will now follow the Master unit.
Inno Pocket Roll Master-Slave Set Up
With this feature you can connect the xtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 19 xtures maximum for 120V and 35 xtures maxi-
mum for 240V. After the maximum xtures has been reached you
will need to use a new power outlet. They must be the same x-
tures. DO NOT mix xtures.
Inno Pocket Roll Power Cord Daisy Chain
Loading ...
Loading ...
Loading ...