ADJ INNO POCKET ROLL User Manual

Loading ...

ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 9ADJ Products, LLC - www.adj.com - Inno Pocket Roll Instruction Manual Page 8

Inno Pocket Roll System Menu

ADDR - DMX Address Setting.

1. Press the MENU button until “ADDR” is displayed, press

ENTER.

2. The current address will now be displayed and ashing.

Press the UP or DOWN buttons to nd your desired address.

When you have found your desired DMX address press ENTER

then press and hold the MENU button for at least 3 seconds to

set your desired DMX address.

3. Connect your DMX Controller.

SLND - This will let you set unit as a slave in a master-

slave conguration.

1. Press the MENU button until “SLND” is displayed, press

ENTER. Either “SL 1” or “SL 2” will be displayed.

2. Press the UP or DOWN buttons until your desired setting is

displayed, and press ENTER to conm.

NOTE: In a Master/Slave conguration you can set one xture

to Master and then set the next xture to “SL 2”, the xtures

will now have contrast movement to each other.

SHND: SH 0 - SH12 - Show modes 0-12 (Factory

programs). Show mode can run with or without sound

active mode active.

1. Press the MENU button until “SHND” is displayed, press

ENTER.

2. “Sh X” will now be displayed, “X” representing a number

between 0-12. Programs 1-12 are factory programs, while “Sh

0” is random mode. Press the UP or DOWN buttons to nd your

desired show.

3. When you have found your desired show press ENTER, then

Inno Pocket Roll System Menu

Loading ...

ADJ INNO POCKET ROLL Products mini moving roller, 12W

User Manual - Page 5