Loading ...
Cycle Selection (continued)
Remojar y Pre-Lavar (Soak & Prewash) Cycle
Remojar (Soak)
Use Remojar (Soak) to treat heavily soiled or
stained items. Remojar provides 3 minutes of
agitation and 12 minutes of soaking time. The
load then advances into the Pre-Lavar portion of
the cycle.
Use the amount of detergent recommended for
a normal wash cycle. If desired, use bleach or a
soaking agent for colorfast items.
The Remojar water temperature is the same as
the rinse water temperature selected.
Follow Remojar with a complete wash cycle
using the normal amount of detergent.
Pre-Lavar (Prewash)
Use Pre-Lavar (Prewash) when soaking is not
necessary. Pre-Lavar helps remove protein-based
stains such as milk, grass and blood. It also helps
loosen soils before washing. Pre-Lavar provides
3 minutes of wash agitation.
Use the amount of detergent recommended for
a normal wash cycle.
The Pre-Lavar water temperature is the same as
the wash water temperature selected. To avoid
setting protein stains, select cold water.
Follow Pre-Lavar with a complete wash cycle
using the normal amount of detergent.
Controls
Always follow instructions on fabric care labels.
TEMPERATURA LAVAR/ENJUAGUR (WASH/RINSE
TEMPERATURE) sets water temperatures for
washing and rinsing. Select wash water
temperature according to fiber content, soil level
and type of detergent. A cold water rinse saves
energy and reduces wrinkling. The following
chart suggests wash/rinse temperatures for basic
fabric types.
Fabric Type
Heavily soiled white/colorfast
cotton, perm press
Lightly soiled white/colorfast Warm/Cold
cotton, perm press Tibio/Frio
Noncolorfast fabrics, knits, Cold/Cold
delicates, hand washables Frio/Frio
Wash/Rinse
Temperature
Hot/Cold
Caliente/Frio
Tama_o de la Carga (Load Size) sets the amount
of wash and rinse water for the wash load. Select
a water level appropriate for the load size. There
should be enough water for items to move freely.
To increase water level after the wash cycle
begins, turn the Tamano de la Carga control to
Nueva Selection (Reset) and hold. When water
begins to enter the tub, turn the control to the
desired setting.
ENJUAGUE EXTRA (EXTRA RINSE) provides an
additional rinse at the end of the Regular cycle.
Turn the Enjuague Extra control to SI(ON) to
automatically advance from the Regular cycle to the
Extra Rinse cycle.
Turn the Enjuague Extra control to NO to conserve
water when an automatic extra rinse is not desired.
Energy Saving Tips
Wash full loads. Oversize loads use extra energy.
Undersize loads waste energy.
When small wash loads cannot be avoided, use
lower water levels.
Select the appropriate cycle and time for each
load. Shorten wash times for lightly soiled loads.
To reduce drying time, select a fast spin speed to
remove more water from heavy items such as
towels and jeans.
Use warm water to wash most loads. Limit hot
water washes to heavily soiled and white loads.
Use cold water for lightly soiled items and
rinsing.
Operate the washer in early morning and late
evening when utility demands are low.
Follow proper laundry procedures to avoid
rewashing.
P/N 134325400(031 I)
Loading ...
Loading ...