Loading ...
Loading ...
Loading ...
Command Descriptions
77
The "RADIUS-Assigned QoS Enabled" checkbox provides a quick way to globally
enable/disable RADIUS-server assigned QoS Class functionality. When checked, the
individual ports' ditto setting determine whether RADIUS-assigned QoS Class is
enabled on that port. When unchecked, RADIUS-server assigned QoS Class is
disabled on all ports.
RADIUS-Assigned VLAN
Enabled
RADIUS-assigned VLAN provides a means to centrally control the VLAN on which a
successfully authenticated supplicant is placed on the switch. Incoming traffic will be
classified to and switched on the RADIUS-assigned VLAN. The RADIUS server must
be configured to transmit special RADIUS attributes to take advantage of this feature
(see RADIUS-Assigned VLAN Enabled below for a detailed description).
The "RADIUS-Assigned VLAN Enabled" checkbox provides a quick way to globally
enable/disable RADIUS-server assigned VLAN functionality. When checked, the
individual ports' ditto setting determine whether RADIUS-assigned VLAN is enabled
on that port. When unchecked, RADIUS-server assigned VLAN is disabled on all
ports.
Guest VLAN Enabled A Guest VLAN is a special VLAN - typically with limited network access - on which
802.1X-unaware clients are placed after a network administrator-defined timeout.
The switch follows a set of rules for entering and leaving the Guest VLAN as listed
below.
The "Guest VLAN Enabled" checkbox provides a quick way to globally
enable/disable Guest VLAN functionality. When checked, the individual ports' ditto
setting determines whether the port can be moved into Guest VLAN. When
unchecked, the ability to move to the Guest VLAN is disabled on all ports.
Guest VLAN ID This is the value that a port's Port VLAN ID is set to if a port is moved into the Guest
VLAN. It is only changeable if the Guest VLAN option is globally enabled.
Valid values are in the range [1; 4095].
Max. Reauth. Count The number of times the switch transmits an EAPOL Request Identity frame without
response before considering entering the Guest VLAN is adjusted with this setting.
The value can only be changed if the Guest VLAN option is globally enabled.
Valid values are in the range [1; 255].
Allow Guest VLAN if
EAPOL Seen
The switch remembers if an EAPOL frame has been received on the port for the life-
time of the port. Once the switch considers whether to enter the Guest VLAN, it will
first check if this option is enabled or disabled. If disabled (unchecked; default), the
switch will only enter the Guest VLAN if an EAPOL frame has not been received on
Loading ...
Loading ...
Loading ...