Loading ...
Loading ...
Loading ...
136
(of the MVR VLAN) will be shown by clicking the view button. Profile selected for
designated interface channel is not allowed to have overlapped permit group
address.
Profile Management
Button
You can inspect the rules of the designated profile by using the following button:
: List the rules associated with the designated profile.
Port The logical port for the settings.
Port Role Configure an MVR port of the designated MVR VLAN as one of the following roles.
Inactive: The designated port does not participate MVR operations.
Source: Configure uplink ports that receive and send multicast data as source ports.
Subscribers cannot be directly connected to source ports.
Receiver: Configure a port as a receiver port if it is a subscriber port and should only
receive multicast data. It does not receive data unless it becomes a member of the
multicast group by issuing IGMP/MLD messages.
Be Caution: MVR source ports are not recommended to be overlapped with
management VLAN ports.
Select the port role by clicking the Role symbol to switch the setting.
I indicates Inactive; S indicates Source; R indicates Receiver
The default Role is Inactive.
Immediate Leave Enable the fast leave on the port.
Buttons
Click to add new MVR VLAN. Specify the VID and configure the new entry. Click
"Save".
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
Loading ...
Loading ...
Loading ...