Loading ...
Loading ...
Loading ...
18
PROBLEM CAUSE CORRECTION
APPLIANCE OPERATION
Appliance does
not run.
• Appliance is plugged
into a circuit that has a
ground fault interrupt.
• Temperature Control is
in the OFF position.
• Appliance may not be
plugged in or plug is
loose.
• House fuse blown or
tripped circuit breaker.
• Power outage.
• Use another circuit. If you are unsure
about the outlet, have it checked by a
certied technician.
• See ELECTRONIC CONTROL section.
• Ensure plug is tightly pushed into outlet.
• Check/replace fuse with a 15-amp time-
delay fuse. Reset circuit breaker.
• Check house lights. Call local
electric company.
Appliance runs
too much or too
long.
• Room or outside
weather is hot.
• Appliance has recently
been disconnected for
a period of time.
• Large amounts of
warm or hot food have
been stored recently.
• Door is opened too
frequently or too long.
• Door may be slightly open.
• Temperature control is
set too low.
• Gaskets are dirty, worn,
cracked, or poorly
tted.
• It’s normal for the appliance to work
longer under these conditions.
• It takes 24 hours for the appliance to
cool down completely.
• Warm food will cause appliance to run
more until the desired temperature is
reached.
• Warm air entering the appliance causes
it to run more. Open door less often.
• See “DOOR PROBLEMS”.
• Turn control knob to a warmer setting. Allow
several hours for the temperature to stabilize.
• Clean or change gasket. Leaks in door
seal will cause appliance to run longer in
order to maintain desired temperatures.
APPLIANCE TEMPERATURES
Interior appliance
temperature is too
cold.
• Temperature control is
set too low.
• Set control to a warmer setting. Al-
low several hours for temperature to
stabilize.
Temperature
inside appliance is
too warm.
• Temperature control is
set too warm.
• Door is opened too
frequently or too long.
• Door may not be seat-
ing properly.
• Large amount of warm
or hot food has been
stored recently.
• Appliance has recently
been disconnected for
a period of time.
• Turn control to a colder setting. Allow
several hours for temperature to stabilize.
• Warm air enters the appliance every time
the door is opened. Open door less often.
• See “DOOR PROBLEMS”.
• Wait until the appliance has had a
chance to reach its selected tempera-
ture.
• Appliance requires 24 hours to cool
down completely.
“LO” is displayed
on control.
• Control has been
locked.
• Press the CONTROL LOCK key for three
seconds to unlock.
“E7”, “E8”, “E9” is
displayed on control.
• The control has regis-
tered an error code.
• For toll-free telephone support in the
U.S. and Canada: 1-800-374-4432
“Sb” is displayed
on control.
• The control is in Sab-
bath Mode.
• Pressing the CONTROL LOCK and TEMP
MODE keys to exit Sabbath Mode.
Visit our web site at
www.frigidaire.com
1-800-944-9044 (United States)
1-800-265-8352 (Canada)
BEFORE YOU CALL
Loading ...
Loading ...