Loading ...
Loading ...
Loading ...
EN
5
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times
and beeps will sound. The option will not be enabled.
ZONE WASH
If there are not many dishes to be washed, a half loading may
be used in order to save water, electricity and detergent.
Select a compatible program (see “Programs table”), and then
press the ZONE WASH button: the symbol of the chosen rack
will appear on the display:
(only lower rack selected)
(only upper rack selected)
(only cutlery rack selected)
By default the appliance washes dishes in all racks.
Option is OFF.
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent directly
to tub instead of detergent dispenser.
ActiveDry
ActiveDry is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying per-
formance every day. Door opens at the temperature that is safe to your
kitchen furniture, thus door will not be opened when the option of
SHORT TIME is on.
As additional steam protection, special designed protection foil is ad-
ded together with the dishwasher.
To see how to mount protection foil please refer to (INSTALLATION
GUIDE).
This feature is active by default, but it is possible to deactivate it in the
“SETTINGS MENU”.
TABLET DETERGENT (All-in-one)
This setting allows you to optimize the performance of the
program according to the type of detergent used.
Press the TABLET DETERGENT button (the corresponding
symbol will light up) if you use All-in-one detergents in
tablet form (rinse aid, salt and detergent in 1 dose).
If you use powder or liquid detergent, this option should
be o.
SHORT TIME
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
Select a compatible program (see “Programs table”), press
the SHORT TIME button and the indicator light will switch on.
To deselect the option, press the same button again.
LIGHT ON THE FLOOR
A LED light projected on the oor indicates that the dishwasher
is working. The light stays on during the cycle and switches o
at the end of the cycle.
This feature is active by default, but it is possible to deactivate
it in the “SETTINGS MENU”.
ZONE WASH 3D
Option works with one rack at once. In particular, we
recommend to use it with MIXED and Intensive cycles - thanks
to the additional 3D water jets placed on the bottom o the
cavity, ZONE WASH 3D option allows to save energy or to
increase the washing performance of the dishwasher
• 3D ZONE WASH + MIXED CYCLE: it allows to reduce energy
consumption up to 40%.
• 3D ZONE WASH + INTENSIVE CYCLE: it increases the washing
performances up to 40%. Ideal for very soiled mixed loads,
e.g. pans and saucepans, dishes with heavy encrustation
or dicult-to-clean crockery (grater, vegetable mill, dirty
cutlery).
How to activate the option:
1. Select a compatible cycle (MIXED or Intensive).
2. Press 3D button to activate the option: a basket icon will
blink for a few seconds.
3. It is possible to change the selected rack pressing the ZONE
WASH button.
START DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the
DELAY button (repeatedly) to delay the start of the program.
Adjustable from 0:30 to 24 hours. When 24 hours is setting
has been reached, press the START DELAY another time to
deactivate the START DELAY function.
2. Press the START button and close the door within 4 sec. the
timer will begin counting down.
3. Once this time has elapsed, the indicator light switches o
and the program begins automatically.
The START DELAY function cannot be set once a program
has been started.
EXTRA DRY
To improve the drying of the dishes, after selecting the
program, press the EXTRA DRY button and the indicator light
comes on.
A higher temperature during the nal rinse and an extended
drying phase allow for improving drying. To deselect the
option, press the same button again. The EXTRA DRY option
results in the lengthening of the wash cycle.
WATER TAP CLOSED – Alarm
Flashes when there is no inlet water or water tap is closed.
INTERNAL LIGHTS
When the feature is active the LEDs in the tub are automatically switched
on/o as soon as the user open/close the door respectively. If the door
remains opened for more than 10 min, the LEDs in the tub switch o
(to turn them on again, the door has to be closed and opened again).
This feature is active by default, but it is possible to deactivate it in the
“SETTINGS MENU”.
Loading ...
Loading ...
Loading ...