Loading ...
Loading ...
Loading ...
8
4.5"
(114 mm)
4.5"
(114 mm)
4.5"
(114 mm)
4.5"
(113 mm)
4.5"
(114 mm)
12. Secure drain hose
Laundry Tub Standpipe Wall
Secure drain hose to laundry tub leg, drain standpipe, or inlet
hoses for wall standpipe with cable tie.
Level Washer
IMPORTANT: Level washer properly to reduce excess noise and
vibration.
Place level herePlace level here
13. Check levelness of washer
Move the washer to its nal location. Place a level on top edges
of washer. Use side seam as a guide to check levelness of sides.
Check levelness of front using lid, as shown. Rock washer back
and forth to make sure all four feet make solid contact with oor.
If washer is level, skip to step 15.
Not Level LEVEL Not Level
Models with
plastic feet
14. Adjust leveling feet
If washer is not level:
Use adjustable pliers to turn the plastic leveling foot
counterclockwise to lower the washer or clockwise to raise the
washer. On all models, recheck levelness of washer and repeat
as needed.
HELPFUL TIPS:
ʍ
You may need to adjust two different feet to level your unit.
Ensure each foot remains secured to the washer’s base.
ʍ
You may want to prop up the front of the washer about
4" (102 mm) with a wood block or similar object that
will support the weight of the washer when making the
adjustments.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
15. Plug into a grounded 3 prong outlet
Loading ...
Loading ...
Loading ...