Loading ...
Loading ...
Loading ...
101
3. After the scanner has been connected successfully, launch your
TWAIN-compliant image-editing software application to start a scan.
Note:
The network scanner can be used by one user at a time. If the network
scanner is being used by other user, you will be prompted with a message to
connect the scanner later. When the scanner is available, you will also be
prompted with a message to connect the scanner and start scanning your
document.
If the network scanner has not been found, it is probably the scanner and
your computer are not in the same LAN. In this case, you can assign a
specific IP address of the scanner to let [Virtual Scanner Link] automatically
search the scanner. Click the [Option] button, type your IP address on the
[Searching Address] field (1), then click the [+] button (2) and finally click
[OK] (3) to complete.
Searching Time: When the program is launched, it automatically searches the
scanner in the network in 5 seconds (default). The searching time can be
changed from a range of 5 to 20 seconds.
If the [Virtual Scanner Link] program has been closed and then launched
again, [Virtual Scanner Link] will automatically search and connect the
network scanner it has previously connected to.
(1)
(2)
(3)
Loading ...
Loading ...
Loading ...