Loading ...
Loading ...
Loading ...
7
Operating Instructions
Control icons
Notes:
o Touch entire icon(s): a short beep will indicate a functional operation.
o Allow approximately 2 seconds for the canopy motor to start.
Power icon
Touch the power icon to turn the canopy motor on or off.
The motor will resume the speed to which it was previously set.
Speed 1, 2, 3 icons
The canopy motor can be switched on by touching either 1, 2 or 3.
Press 1, 2 or 3 to increase or decrease speed.
Light icon
Touch the light icon to turn the canopy lights on or off.
The brightness will resume at the level to which it was previously set.
Once on, touch and hold the icon for more than 1 second to increase or decrease the brightness.
The lamp is adjustable in 10 steps from mood lighting to fully bright.
Mood lighting to fully bright is indicated by a succession of short beeps.
Timer icon
The timer is used to enable the canopy motor to continue operating for a short period after cooking has finished.
Touch the timer icon to start a countdown from 10 minutes.
The icon will flash to indicate timer functioning.
After 10 minutes the motor will stop and the canopy lights (if on) will switch off.
The countdown can be cancelled at any time during the 10 minute period by touching the icon again.
Filter cleaning reminder mode +
This function acts as a reminder to clean the filters. It can be set in 20 hour increments, from 20 to 100 hours.
Touch and hold the power and timer icons to set the filter cleaning interval. To indicate 20 hours the control
panel will beep and flash twice. To indicate 40 hours, the control panel will beep and flash four times. Repeating
this operation will increase the interval up to a maximum of 100 hours (ten beeps and flashes).
The interval to set between cleaning depends on the frequency of use and cooking style.
Note:
o This filter cleaning reminder mode can be turned off, which is the next setting after the ‘100 hours setting’
with a long beep.
Pictured: Capacitive touch icons
Loading ...
Loading ...
Loading ...