Loading ...
Loading ...
Loading ...
6
Installation - continued
7. Connect and secure the ducting (use duct tape if required).
8. Insert the upper chimney piece into the lower chimney piece. Assemble the lower chimney bracket onto
the lower chimney using screws provided and ensure the bracket holds both chimney pieces. Do not fully
tighten the screws as some adjustments are required in step 9.
9. Place the chimney assembly onto the canopy body. Extend the upper chimney to the fixed upper chimney
bracket (Pg. 5 Installation) and secure them together as shown in the picture below.
10. Refit filters. Connect to the power supply and switch on the power to the canopy hood.
Recirculation mode
1. This unit can be installed to operate in recirculation mode where ducting is not a chosen/desired or practical
option. There are recirculation grilles fitted on each side of the upper chimney which allow the cleansed air
to return to the kitchen. Ensure that the side outlet grilles are not obstructed. Even a partial obstruction
will restrict the efficiency of the rangehood.
2. Replace aluminium filters with charcoal filters (Pg. 9 Parts & Accessories list).
Upper chimney
Lower chimney
bracket
Loading ...
Loading ...
Loading ...