Loading ...
Loading ...
Loading ...
8
Installation
A standard electrical supply (115 VAC only, 60 Hz, 10A), properly grounded in accordance with National
Electrical Code and local codes and ordinances is required.
IMPORTANT: Do not kink or pinch the power supply cord between the appliance and wall or cabinet.
MOVEMENT OF YOUR APPLIANCE
Position the appliance in a dry and well-ventilated place. Keep the appliance away from direct sunlight, heat-
ers, and corrosive gases or chemicals.
Clean the interior surface with lukewarm water using a soft cloth.
Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.
The appliance can be simply moved from one room to another by using the pre-installed wheel rollers.
If the appliance is needed to be lifted, two or more people should move appliance. Failure to do so can result
in back or other injury.
We do not recommend installing the appliance on carpet.
LEVELING THE APPLIANCE
It is important for the appliance to be leveled in order to work properly. It can be raised or lowered by turning the
two feet on the bottom of the machine. If the appliance is not leveled during installation. The doors may not close
or seal properly, causing cooling, frost, or moisture problems. It is very important that the appliance is at level in
order to function properly.
NOTE: This appliance comes with 2 leveling legs
We recommend using a carpenter’s level to check the machine.
Place a carpenter’s level on top of the product to see if the appli-
ance is level from front to back and side to side.
Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the ap-
pliance
Turn the leveling feet to the left to raise that side of the appli-
ance
Loading ...
Loading ...
Loading ...