Loading ...
Loading ...
Loading ...
11
Reversing the Door Position
1. To access the lower hinge assembly, tilt back or
lay the appliance on its back
2. Remove both legs located at the front of the cabi-
net: adjustable left on hinge side and fixed leg on
opposite side.
3. Remove the screws holding the lower hinge as-
sembly to the cabinet
4. Remove the main door assembly from the refrig-
erator cabinet by opening the door and pulling
down.
5. Remove the screws from the middle hinge as-
sembly. Then remove the hinge and freezer door.
6. Remove the top cover, hinge, and screws
7. Re-install the top hinge pin on the opposite side
of the cabinet
8. Remove the door plugs and door bushing located
on the top and bottom of each door assembly
9. Interchange positions of plugs and bushings on
both doors
10. Re-install door assembly on cabinet
11. Re-install the middle hinge assembly on the op-
posite side.
12. Make sure the door assembly is properly aligned
on the cabinet, before tightening hinge screws
13. Re-install the main door assembly on cabinet
14. Re-install the lower hinge assembly on the oppo-
site side
15. Make sure to change bushing and screw on op-
posite sides on bottom of unit
16. Make sure the door assembly is properly aligned
on the cabinet, before tightening lower hinge
screws
17. Re-install both legs (reversed from the original
positions: adjustable leg on hinge and fixed leg
on opposite side).
Caution: To avoid injury to yourself and/or property, we recommend someone assist you during the door
reversal process.
Loading ...
Loading ...
Loading ...