Loading ...
Loading ...
Loading ...
Pull-out Tray
HOW TO USE
Before use
Clean the refrigerator.
Connect the power supply.
Check if the power supply is connected before use.
Read the “Turning On The Power” section.
Wait for the refrigerator to cool.
Allow your refrigerator to run for at least two to three hours before putting food
in it. Check the flow of cold air in the freezer compartment to ensure proper
cooling.
The refrigerator makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature lowers.
Open refrigerator doors to ventilat the interior.
CAUTION
Putting food in the refrigerator before it has cooled could cause the food to
spoil, or a bad odor could remain inside the refrigerator.
CAUTION
y
y
NOTE
Remove adhesive residue by wiping it off with your thumb or dish detergent.
Clean your refrigerator thoroughly and wipe off all dust that accumulated
during shipping.
Do not scratch the refrigerator with a sharp object or use a detergent that
contains alcohol, a flammable liquid or an abrasive when removing any
Do not peel off the model or serial number label or the technical
tape or adhesive from the refrigerator.
information on the rear surface of the refrigerator.
The inside of the refrigerator may smell like plastic at first. Remove any adhesive
tape from inside the refrigerator and open the refrigerator doors for ventilation.
11
HOW TO USE
ENGLISH
Loading ...
Loading ...
Loading ...