Loading ...
Loading ...
Loading ...
Changing the delay start after
the countdown has started
To change the delay start:
1.
Touch the Start/Pause
button to
pause the appliance. The related
indicator flashes.
2.
Touch the Delay Start button
repeatedly until the display shows the
desired delay time.
3. Touch the Start/Pause
button
again to start the new countdown.
12.8 The ProSense load
detection
The program duration in
the display is referred to a
medium/high load.
After touching the Start/Pause
button, the maximum declared load
indicator goes off, the indicator
flashes, the ProSense starts the laundry
load detection:
1.
2.
The appliance detects the load in the
first 30 seconds: the indicator and
the time dots flash, the drum rotates
shortly.
At the end of the load detection, the
indicator goes off and the time
dots stop flashing. The program
duration will be adjusted accordingly
and could increase or decrease. After
further 30 seconds, the water filling
starts.
At the end of the load detection, in case
of drum overload, the indicator
is
flashing in the display:
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause button to start
the program again. The ProSense phase
can be repeated up to three times (see
point 1).
Important! If the laundry amount will not
be reduced, the washing program starts
anyway, despite the overload. In
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
program start, the program
duration could be adjusted
again depending on the
capacity of water absorption
of the fabrics.
The ProSense detection is
carried out with complete
washing programs only (no
skipping phase selected).
12.9 Program phase
indicators
When the program starts the indicator of
the running phase flashes and the other
phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
.
During the washing cycle, the appliance
mixes the detergent, the stain removal
for fabric treatment and/or the fabric
softener with water before introducing
MIX
them into the drum; the indicator
appears and disappears on the display
according to the different program
phases (the arrows flash alternatively).
If you select the Plus Steam the steam
phase indicators come on.
The steam phase is running: .
The anti-crease phase is running:
.
ENGLISH 29
Loading ...
Loading ...
Loading ...