Loading ...
Loading ...
Loading ...
23
10.2.1. Channel installation mode – Antenna
• Automatic Channel Search: Start a scan for analogue and digital channels. You can press the Back button to
cancel the scan. The channels that have already been found will be stored in the channel list.
• Update Scan: Search for updates. Previously added channels will not be deleted, but any newly found
channels will be stored in the channel list.
• Analogue Manual Scan: Start a manual scan for analogue channels. Enter the Start Frequency and then
select Scan Up or Scan Down. When a channel is found the scan will be completed and the found channel will
be stored in the channel list.
• Single RF Scan: Select the RF Channel by using the Right/Left directional buttons. Signal Level and Signal
Quality of the selected channel will be shown. Press OK to start scan on the selected RF channel. The found
channels will be stored in the channel list.
• Manual Service Update: Start a service update manually.
• LCN: Set your preference for LCN. LCN is the Logical Channel Number system that organizes available
broadcasts in accordance with a recognizable channel number sequence (if available).
• Channel Scan Type: Set your scan type preference.
• Channel Store Type: Set your store type preference.
• Favourite Network Select: Select your favourite network. This menu option will be active, if more than one
network is available.
• Channel Skip: Set channels to be skipped when switching the channels via Programme +/- buttons on the
remote. Highlight the desired channel/s on the list and press OK to select/unselect.
• Channel Swap: Replace the positions of the two selected channels in the channel list. Highlight the
desired channels on the list and press OK to select. When the second channel is selected, the
position of this channel will be replaced with the position of the rst selected channel. You should set the
LCN option to O or Default in order to enable this feature.
• Channel Move: Move a channel to the position of another channel. Highlight the channel you want to move
and press OK to select. Then do the same for a second channel. When the second channel is selected, the
rst selected channel will be moved to the position of that channel. You should set the LCN option to O or
Default in order to enable this feature.
• Channel Edit: Edit channels in the channel list. Edit the name and channel number of the
selected channel and display Network Name, Frequency, Colour System and Sound System information
related to that channel if available. Depending on the channel other options may also be editable. You can
press the Blue button to delete the highlighted channel.
• Analogue Channel Fine-tune: Fine-tune an analogue channel. A list of available analogue channels will
be displayed. Select the desired one from the list and press OK button. Then change the frequency of the
channel by pressing Left/Right directional buttons. Press OK to store the new frequency for that channel.
Press Back to cancel. This item may not be visible, depending on whether or not the last watched channel
was analogue.
• Clear Channel List: Delete all channels stored in the channel list of the selected channel installation mode.
A dialogue will be displayed for conrmation. Highlight OK and press OK button to proceed. Highlight Cancel
and press OK to cancel.
10.2.2. Channel installation mode – Cable
• Automatic Channel search: The Smart TV searches for digital and analog channels that can be received via
cable. Depending on the country, optional DVB-C cable TV providers are oered during the initial installation
and are listed on the Select operator screen. If you receive the DVB-C signal from a non-dedicated cable TV
provider, select the option Other. Press OK to start the channel search. In the Channel Search menu, you
can select one of the three channel search options: Full, Advanced, or Quick.
• Full: Automatic search of all available DVB-C channels.
• Advanced: Automatic search of all available DVB-C channels. For this option, it is necessary to enter
the DVB-C provider’s reception parameters, frequency and network ID. With this search option, the
channels are sorted by LCN of the cable providers.
• Quick: Automatic search for all available DVB-C channels. This search will search all available cable
transponders with the standard symbols.
• Single RF Scan: Manual search of DVB-C channels by transponder frequency.
• LCN: LCN options for DVB-C channel search.
• Channel Scan Type: Set your scan type preference.
• Channel Store Type: Set your store type preference.
• Favourite Network Select: Select your favourite network. This menu option will be active, if more than one
network is available. This option may not be available depending on the selected country during the initial
Loading ...
Loading ...
Loading ...