Loading ...
Loading ...
Loading ...
16 – ENGLISH
Pairing A Bluetooth Wireless Technology Enabled
iPhone/iPod Touch/iPad
1. Press the Albergo+'s front panel Bluetooth button or change the source to Bluetooth.
This will power on the Bluetooth. Turn the volume up about ¼ to start. Also turn up the
volume on the source device (the device you are streaming from).
2. Select “Settings” (depending on software version).
3. Select “General”.
4. Select “Bluetooth”.
5. Switch Bluetooth “On” to initiate searching.
6.
Select “Tivoli Bluetooth (Not Paired)” when it appears on the display. If you are
prompted to enter a PIN, enter “0000”. “Tivoli Bluetooth” will change from “Not Paired”
to “Connected”.
7.
You will hear a ring tone from the Albergo+ and you can begin playing your music files
wirelessly. Adjust the volume level on your device. You should not have to pair your iPhone/
iPod/iPad again.
The volume output level of music files varies. If you prefer an even higher output level, check
the settings in your iPhone/iPod touch/iPad: Set the EQ Off, the SoundCheck Off, and the
Volume limit Off.
If you encounter a problem Pairing, press the small arrow to the right of “Tivoli Bluetooth” on
your iPhone/iPod touch/iPad display and select “Forget this Device”, then repeat the Pairing
process. Depending on your device, you may need to make multiple attempts at Pairing
and/or Connecting to the Albergo+, but please give your device adequate time to Pair or
Connect before repeating the process.
When streaming music, you can press the blue arrow to the right of the next track button
>>/ on the iPhone/iPod touch/iPad display to alternate between the iPhone/iPod/iPad and
Bluetooth.
NOTE:
• The Albergo+ will remember pairing information for up to 8 devices. Additional de-
vices can be paired, but the least-recently used device will be replaced by the newly
paired device.
• If the audio drops out or stops during playback, move your device closer to the Al-
bergo+, or check to be sure another wireless device is not interfering with the signal.
• When switching from Bluetooth to DAB or FM, you may need to re-adjust (lower) the
radio’s volume level.
Digital Radio/FM Reception
The included external antenna will provide good reception. In strong FM signal locations,
reducing the antenna’s length may provide better reception.
If you are using the Albergo+ together with the optional Albergo Speaker for stereo sound
and you are listening to a noisy FM station, press the Mono button on the remote control, as
this might make the FM station more listenable. The display will show an “M” when in mono
Buildings made with concrete, steel, or aluminum siding will hinder reception. Household
appliances, electric blankets, computers, CD players, and other electronic devices can also
Loading ...
Loading ...
Loading ...