Loading ...
Loading ...
Loading ...
Ice Service
Ice Trays
(on models without automatic icemaker)
To release ice cubes,
turn the tray upside down, hold
it over a container, and twist
both ends.
For only one or two ice
cubes, leave the tray right-side
up, twist both ends slightly, and
remove as many cubes as you wanL
Wash ice trays in lukewarm water only. Do not put
them in an automatic dishwasher_
Automatic Icemaker Accessory Kit
(optional at extra cost)
If your refrigerator did not come already equipped with
an automatic icemaker, you may add one- contact your
Sears store or Sears Service Center.
Automatic Icemaker
(on icemaker_equipped models)
if your refrigerator is
operated before water
is connected to the
icemaker, keep the
icemaker feeler arm in the
STOP (up) posltion..
When the refrigerator
has been connected to
the water supply and the
water has been turned
on, move the ice storage
bin into place under the
icemaker.. Then move the
feeler arm to the ON
(down) position
The ice cube mold will
automatically fill with water
after cooling to freezing
temperature, and fi_'st
cubes normally freeze after
several hours
Icemoke; Feeler Arm in
STOP (up)
position
!
FeelerA_min ON
(down) position
When cubes are solidly frozen, they will be ejected from
the mold into the ice storage bin by means of a sweeper
arm. lcemaking wilt continue until the feeler arm senses
that there are enough cubes in the bin and halts the
operation temporarity. Be sure nothing interferes with the
swing of the feeler arm.
For maximum ice storage, level the stored cubes with
your hand occasionally..
Once your icemaker is in operation, throw away
the first few batches of ice cubes° This wilt flush away
any impurities in the water line.. Do the same thing after
vacations or long periods "when ice isn't used.
Move feeler arm to STOP (up) position when:
• the home water supply is to be off for several hours
• the ice storage bin is to be removed for a period
of time.
" going away on vacation (Also turn off the valve in the
water supply line to the refrigerator.)
if ice is not used often, old cubes will become cloudy
and taste stale. Empty the ice storage_in periodically
and wash it in lukewarm water
tf this is your first icemaker, you will hear occasional
sounds that may be unfamiliar They are normal ice-
making sounds and are not cause for concern
Water Filter Accessory
(optional at extra cost)
Your ice cubes can only be as fresbtasting as the water
that produces them,_That's why it's a good idea to purify
the water with a water filter
The water filter is an optional part at extra cost and is
available from your Sears Service Center._Order Filter
No. 978488 and it may be installed in minutes when
attached to the inlet water tube connection
Water Supply Accessory Kit
(optional at extra cost)
A water supply kit containing copper tubing, shut-off
valve, fittings and instructions needed to connect the
icemaker to your cold water line isalso available from
your Sears store or Sears Service Center
See Automatic Icemaker Water Line
installation Requirements on next pager
Loading ...
Loading ...
Loading ...