Loading ...
Loading ...
Loading ...
°Placetheoldestitemsupfrontsotheycanbeusedup
promptly
-Usedoorshelvesformostoftenuseditems,
To save money in energy and food costs .......
•Cover moist foods with tight lids, plastic film or foil
•Leaf vegetables and fruits placed in drawers wilt last
longer when stored in closed plastic containers or
wrapped in plastic film
Do not overload your fresh food or freezer
compartment with a tot of warm food at once.
"Open the doors the fewest times possible to save
electrical energy
°When going out of town for several days, leave
as few perishables as possible in the refrigerator If your
refrigerator has an icemaker, move the icemaker feeler
arm to the STOP (up) position and shut off water to the
refrigerator.
Energy-Saving Tips
Location of your refrigerator isimportant Avoid locating
it next to your range, a heating vent or where the sun will
shine directly on iL
in order for the refrigerator to work properly, air must
circulate around it See page 3 for recommended
minimum clearances..
' Don't open the doors more often than necessary.
"Close the doors as soon as possible, particularly in hot,
humid weather.
" Besure the doors are closed tightly, Before leaving the
house or retiring for the night, check to be sure the doors
haven't been left open accidentally
° Store only those foods requiring refrigeration in your
refrigerator.
oWipe moisture from bottles and cartons before putting
them in the refrigerator
• Keep foods covered to reduce moisture buildup inside
the refrigerator
°Ifyou turn the control to the coldest position for quick
chilling or freezing, be sure to turn it back to regular
setting
" Keep the condenser clean (see Care and
Cleaning section),
• Don't overcrowd your refrigerator, Overcrowding can
require extra electrical energy to keep everything cool,
Shelves
Adjustable Shelves
Shelf supports at various levels enable you to reposition
the shelves from time to time to better accommodate your
variable inventory of refrigerated foods
Half-Width Shelves
(on models so equipped)
One end rests on a
molded side-wall support;
a bracket on the other end
hooks into a track an the
rear cabinet wal!
To remove, fift the shelf
up at front, then off the
support and out of
the track
]ft up I
,oooo,
To replace, select desired
shelf height Wilh shelf front
raised slightly, hook the
bracket's top Juginto the
track, then lower the shelf
onto the support
Tempered glass shelves
(on models so equipped)
are adjustable in the same
manner
Note: The shelf to the right of the track is designed to
hook into the right-hand slot; the shelf to the left is
designed to hook into the lebhand slot,,
FulI-Width Shelves
(on models so equipped)
Some models have a
steel wire sliding shelf, a
stationary tempered glass
shelf or two steel wire
stationary shelves. These
shelves can be relocated
elsewhere in the fresh food _"
compartment
The fuDwidth sliding
shelf has stop-locks
When placed correctly
on the shelf supports,
the shelf witl stop before
coming completely out of the refrigerator and wil!
not flit when you place food on it or remove
food from it.
To remove any full-width shelf, lift the rear of the shelf and
pul! forward
(continued next page)
Loading ...
Loading ...
Loading ...