Loading ...
Loading ...
Loading ...
ENGINE/BLADE CONTROL
ADJUSTMENT (911184)
Toadjust engine/blade control:
1.Loosen cable nuts away from bracket.
5. Tighten upper
cable nut until
bracket is secure
between cable
nuts.
6. Engage engine/blade control. Measure
distance between middle of z-bend and
cable bracket. Measurement should be
as shown below.
Kawasaki Engines: 1.125"-1.375"
(2.8 cm - 3.5 cm)
OM1010
2. Squeeze z-bend bracket at engine end
of cable toward front of unit and hold in
place.
....... _ /
- "_\\ OM 1051
7. If correct measurement cannot be set,
contact your local dealer.
\'_ .......... : :::z :: : c iJ
...... \\\. i
OM1040
3. Pull cable down from bracket until there
is no slack in cable.
\
4. Tighten lower
cable nut to
3 mm below
bracket.
Release z-bend
bracket.
OM1061
GB - 21
Loading ...
Loading ...
Loading ...