Loading ...
Loading ...
Loading ...
4
English
12
12
Fig E
6
11
Secure the Work Light Head Stands
2
to the Bracket
Stand
11
with Washers
10
and Bracket Screws
9
. Once
both light heads are secured, hold the Central Handle
6
to align the lock pin to the mounting hole on the tripod
head
4
, squeeze the Quick Release Clip
5
and insert the
assembly into the tripod head.
9
10
5
4
10
11
9
2
Fig F
2
Secure Power Cord Joint
3
onto the Handle
6
by using a
Philips screwdriver(not included).
6
3
Fig G
Adjusting Light Direction (Fig. A, H)
WARNING: Tipping Hazard. To reduce the risk
of serious injury, always make sure the Support
Legs Collar Assembly is in its locked position
before using.
To return the tripod to collapsed carrying position, press
the Tripod Leg Lock
15
and pull the Support Legs Collar
Assembly
14
upward.
Fig C
15
Tripod Height Adjustment (Fig. D)
WARNING: To reduce the risk of serious injury,
remove the work light before adjusting tripod
height.
To adjust height, release the Height Extension Lock(s)
13
and extend the tripod pole(s) to the desired height. Once
height is established, ensure the Height Extension Locks are
secured.
13
Fig D
Assemble Work Light(Fig. E,F,G)
Set Up the work light Assembly by placing the Bracket
Stand
11
on a flat and stable surface. Secure the Central
Handle
6
with two Screws
12
using a Philips screwdriver
(not included).
Loading ...
Loading ...
Loading ...