Loading ...
Loading ...
Loading ...
OPERATIONAL INSTRUCTIONS
SEAT ADJUSTMENT
CAUTION:
1.
2.
Unscrew to remove the ADJUSTMENT KNOB(37) from the FRONT FRAME(1). Slide the REAR FRAME
(3) to adjust the seat. Lock the REAR FRAME(3) in position by inserting the pin of the ADJUSTMENT
KNOB(37) into one of the adjustment holes in the REAR FRAME(3), then tighten the ADJUSTMENT
KNOB(37) to lock the REAR FRAME(3) securely.
Sit on the seat and place your feet on the pedals. You should be able to move through a complete pedal
stroke without locking your knees or shifting your hips on the seat. The seat is too close to the pedals if
you have more than a slight bend in your knees at the bottom of the pedal stroke. The seat is too far from
the pedals if you have to completely straighten your knees at the bottom of the pedal stroke.
1.
2.
Do not attempt to adjust the seat while you are on the Magnetic Recumbent 1350 Bike.
Always tighten the ADJUSTMENT KNOB(37) after adjusting the seat to a new position.
12
To increase the load, turn the TENSION KNOB(25) clockwise. To decrease the load, turn the TENSION
KNOB(25) counterclockwise.
LOAD ADJUSTMENT
Proper seat adjustment is important. There are seven adjustment holes in the REAR FRAME(3). These
adjustment holes allow users to adjust the position of the seat for efficient exercise.
Loading ...
Loading ...
Loading ...