Loading ...
Loading ...
Loading ...
As shown in figure1, remove all
the packing materials(including
the foam base).
Upon opening of the package,
water drops may be seen on the
plastic bag and the porthole. This
is a normal phenomenon resulting
from water tests in the factory.
Water tests are conducted to check
for leakage.
Removethree transportationbolts as shownin
figure 2A. The bolts protect the appliance
from shockduring transportation.Thestepsbelow
should be followed before using theappliance:
1. Removethe back plate of the washing
machine.To removethis you mustremove
three screwsholding the panel.
2. Now you could removethe transportationbolts.
While removing the three boltsfrom the rear
of thewashing machine, removethe rubber
hoseswhich are behindthe transportation
boltsinside the unit at the sametime. Remove
themetalbracket and savein a safeplace for
later use.
3. Reinstallthe backplate.
4. Fill the holes left by the boltswith plastic plugs.
(Attention:The bolts and rubber hoseshould
be kept in a safe placefor later use.)(Fig. 2B)
Back Plate
Fig. 2
Fig. 1
Transportation Bolt
Metal
bracket
Screws
Levelingthe washing machine:Thereare
adjustablefeetunder the bottom of the
washing machine.Beforeuse,thewashing
machineshouldbe adjusted, as shownin
figure 3, so that it is level.
Levelinglegs can be adjusted by turning them
counterclockwiseto raise your washer or
clockwiseto lower your washer.
Fig. 3
lg
Loading ...
Loading ...
Loading ...