Loading ...
Loading ...
Loading ...
• Place the R.H. suspension arm on
outward pointing deck pin. If neces-
sary, rock and raise front of mower to
align deck pin with the hole in suspen-
sion arm. Retain with double loop
retainer spring with loops down as
shown.
• Connect anti-sway bar to chassis
bracket under left footrest and retain
with double loop retainer spring.
• Turn height adjustment knob clockwise
to remove slack from mower suspen-
sion.
• Raise mower to highest position.
• Assemble gauge wheels (See "TO
ADJUST GAUGE WHEELS" in the
Operation section of this manual).
CHECKTIREPRESSURE
The tires on your tractor were overinflated
at the factory for shipping purposes.
Correct tire pressure is important for best
cutting performance.
• Reduce tire pressure to PSI shown in
"PRODUCT SPECIFICATIONS" section
of this manual.
CHECK MOWER LEVELNESS
For best cutting results, mower should be
properly leveled. See "TO LEVEL
MOWER HOUSING" in the Service and
Adjustments section of this manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for
replacing motion, mower drive, and
mower blade drive belts in the Service
and Adjustments section of this manual.
Verify that the belts are routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your
tractor, check to see that the brake is
properly adjusted. See "TO ADJUST
BRAKE" in the Service and Adjustments
section of this manual.
Front
Suspension
Bracket
Double Loop
Retainer Spring
(Outward _g
Chassis deck pins)
Bracket _
Gauge
Wheel
Suspension
Arms
Bracket
Shoulder
Bolt
3/8 Was
3/8-16
Center Double Loop
Locknut Retainer Spring
Use Pliers for
Retainer Springs
f: _Iy
Bar
Idler
Pulley
Single Loop
Retainer
. _, Spring
Deflector Sheild
10
Loading ...
Loading ...
Loading ...