Loading ...
Loading ...
Loading ...
9.1 INSTALLING AND REMOVING
SOCKETS – FIG.4
This wrench is supplied with a 1/2" Square drive
.
Make sure to always use specific “Impact”
sockets or accessories with this tool, use of
chrome vanadium non-impact sockets could
result in damage to your tool and/or personal
injury.
To fit a socket:
– Roughly align the hole in the impact socket with
the sprung loaded ball detent
located on the
square drive anvil
.
– Push fit the socket over the anvil. The mechanism
holds the socket securely in place.
To remove a socket:
– Pull the socket away from the anvil to remove.
Note:
Extra effort may be required when fitting and
removing brand new sockets on their initial usage.
9.2 ROTATIONAL DRIVE SELECTION –
FIG.5
The forward/reverse drive selector switch
determines the direction of rotation of the drive, i.e.
clockwise or anticlockwise.
To alter the direction of rotation:
– Stop the machine and push switch
to the
left or right.
– When the direction switch is pushed to the left,
the drive will rotate clockwise.
– When the switch is pushed to the right, the
drive will rotate anticlockwise.
– Before operation, check that the switch is set in
the required position. Do not change the
direction of rotation until the wrench comes to a
complete stop.
– When the wrench is not in use move the
direction switch to the neutral position (the
middle setting) to lock the trigger out.
Note:
Failure to use the neutral position may
activate the trigger inadvertently. This inadvertent
operation may cause the wrench to become
damaged.
FIG.5
FIG.4
9. BASIC IMPACT WRENCH OPERATIONS
- 16 -
Loading ...
Loading ...
Loading ...