Loading ...
Loading ...
Loading ...
Motor ............................................................ 19.2 Volts DC
Stroke Length ........................................................... 7/8 in.
No Load Speed ............................................... 0-3100/min.
Switch ....................................................... Variable Speed
Charger Rating .......................... 120 Volts, 60 Hz, AC only
Charger Rate ............................................................ 1 hour
INSTRUCTIONS
Your reciprocating saw has been shipped completely
assembled.
• Carefully remove the toot and the accessories from
the box.
• Make sure that all items listed in the packing list are
included.
• Inspect the tool carefully to be sure no breakage or
damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
• If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Reciprocating Saw
Two Blades
1 Battery Pack
Charger
Operator's Manual
_ WARNING: If any parts are missing, do not operate
your toot until the missing parts are replaced. Failure
to do so could result in serious personal injury.
,_ WARNING: The reciprocating saw should never be
connected to a power supply when you are assem-
bling parts, making adjustments, cleaning, perform-
ing maintenance, or when the tool is not in use.
Disconnecting the toot prevents accidental starting
that could cause SERIOUS INJURY.
You may use the reciprocating saw for the purposes listed below:
• Cutting all types of wood products (lumber, plywood, paneling, composition board, and hard wood).
• Cutting masonite and plastic.
• Cutting drywall.
• Cutting metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper.
Loading ...
Loading ...
Loading ...