Loading ...
Loading ...
Loading ...
6
Operating Instructions
First Time Usage
IMPORTANT: You should clean the ceramic hob surface (see “Maintenance and cleaning”
section).
Turn each element on, one at a time, and leave them to run at full heat for five minutes. This will
help to eliminate any new smell that exists and evaporate any humidity that has formed on the
heating elements during transit. Only do this for one element at a time. Place a saucepan half
filled with cold water on the element during this process.
Operation
1. Ensure that the cooktop is connected to the power supply and turned on.
2. Hold the power button for 2-3 seconds. The cooktop will beep and enter standby mode.
3. In standby mode, select the desired cooking zone by pushing the appropriate cooking zone button and
adjust the power using the ‘+’ and ‘-‘ buttons.
4. To switch off a specific cooking zone, push the corresponding cooking zone button and push the ‘-‘ button
until the power setting is zero.
• To turn off all cooking zones simultaneously, hold the power button for 2-3 seconds.
• If any cooking zone is still hot after being switched off, its indicator will display ‘H’.
• Each cooking zone has 9 power levels.
Fast Heating
The Fast Heating function allows the cooktop to build up heat quicker.
1. From standby mode, select the desired cooking zone.
2. Push the ‘+’ button until the cooking zone is at power level 9.
3. Push the ‘+’ button once more. The cooking zone indicator will alternate between 9 and ‘A’.
4. Push the ‘-‘ button to set the desired power level.
5. The cooktop will heat up at power level 9 and automatically switch to the desired power level once it reaches
temperature. See the table below for timing.
Power Level
1
2
3
4
5
6
7
8
9
Fast-heating
time (minutes)
1 3 4.8 6.5 8.5 2.5 3.5 4.5 5
Safety Lock
The safety lock will disable all buttons on the control panel except for the power on/off button. To engage the safety
lock, hold down the safety lock button for 3 seconds whilst in standby mode. The safety lock icon will light up. If you
power off the cooktop whilst the safety lock is activated, the safety lock will still be activated when you power the
cooktop back on again. To disable the safety lock, hold the button down for three seconds.
Multiple-Ring Heating Function
Touch the double-ring button to activate the outer ring of the cooking zone.
Loading ...
Loading ...
Loading ...