Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE _/___/_/_,o_/_o_ _'_ 'r
AS YOU COMPLETE
DATES
/_///
Check Brake Operation _
Check Tire Pressure
Check Operator Presence and
Interlock Systems
Check for Lense Fasteners V's ik_ I
A Sharpen/Replace Mower Blades _3
Lubrication Chart
T Check Battery Level
R Clean Battery and Terminals
Check Transaxle Cooling
Check V-Belts t_ e
Check Engine Oil Level V' V'
Change Engine Oil (with oil filter) _1,: V _
E ChangeEngineOil(withoutoilfilter) li_'1,_ I_
N Clean Air Filter 1##2
G CleanAir Screen I Ve2
Inspect Muffler/Spark Arrester I_
E ReplaceOilFilter(Ifequipped) _i
Clean Engine Cooling Fins
Replace Spark Plug V'
Replace Air Filter Paper Cartridge _2
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions,
GENERALRECOMMENDATIONS
3 - Replace blades more often when mowing in sandy soil
4 - Not required if equipped with maintenance-tree battery.
5 - Tighten fronl axle pivol bolt to 35 ft.-Ibs, maximum.
Do not overtighten.
LUBRICATION CHART
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
(9 Spindle O Spindle
Zerk Zerk
Wheel
Bearing
Zerk
Front
Wheel
Bearing
Zerk
(_ Mandrel ., @ Engine
Zerks
i
Q General Purpose Grease
_) Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bear-ings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
sparingly.
15
Loading ...
Loading ...
Loading ...