DSR36 User Manual

Loading ...

WARNING! Risk of Fire! Keep combustible materials,

gasolineandotherammablevaporsandliquidsclearof

thereplace.

DO NOT:

• storeammablematerialsclosetothereplace

• use gasoline, lantern fuel, kerosene, charcoal lighter

uidorsimilarliquidstostartor“freshenup”areinthis

replace.

E. Lighting Instructions

NOTICE: Youmustestablishagooddrafttopreventsmoke

spillageintotheroom.

The rst three or four res should be of moderate size to

allow the oils and binders to be burned from the replace

and the refractory and paint to cure. You may notice an in-

dustrial odor the rst few res. This is considered normal.

Use well-seasoned wood.

• Open the ue damper to a fully open position.

• Place crumpled or twisted paper under the replace

grate.

• Loosely arrange kindling or small pieces of wood to form

a ‘tent’ on the replace grate.

• Pre-warm the ue to establish a draft to help reduce

smoke spillage during start-up. Hold a rolled up piece

of burning newspaper under the ue damper for a few

moments.

• Light the crumpled paper to ignite the kindling.

• Add small pieces of wood until a hot bed of embers has

been established.

• Add a minimum of three average size pieces of split

rewood, placed to allow combustion air and ames

between them.

VCG Designer Series • DSR36 Owners Manual • 4012-131 • Rev A • 02/20/15

Loading ...

User Manual - Page 13