Loading ...
Loading ...
Loading ...
ElectricalShock Or Personal Injury
Hazard
Disconnectelectricalsupplybefore
servicingor cleaningthe unit. Failure
to do so could resultin electricalshock
or personal injuryfromcleaner sud-
donly starting.
Frequentlycheckand remove hair, string
and lintbuild-upin thebrush area. If build-
up becomes excessive,followthe steps
below.
TO REMOVE BELT
Disconnect power cord from electrical outlet.
Carpet/Bare
Roor Selector
Place the
carpet/bare
floor selec-
tor in the
carpet posi-
tion and
To Carpet lower han-
Position die to lay
vacuum flat.
Slide latches
outwardand
remove noz-
zle cover.
Nozzle
Latches
Agitator
Cover
Furniture
Guard
Retainer
Unfasten the
furniture
guard retain-
ers from the
posts on both
sides of the
agitator
cover.
Depress tabs on
rear of agitator
cover and rotate
forward to
release from the
nozzle body,
The light bulb socket assembly does not
have to be removed, Laythe agitator
cover overto the side outof the way.
Be/t
Position hands on the agitator. If the belt is
still attached to the agitator, there will be
tension on the agitator. Carefully lift the right
end of the agitator and then the left end.
Note: It may be necessary to pull the edge
of the furniture guard out of the way to allow
the ends of the agitator to be removed easily.
Remove the belt from the motor drive shaft.
Personal InjuryHazard
Be careful when removingthe agitator
as the belt tension Is high. Failureto
do so could resultin personalinjury
fromthe agitator releasingquicklyand
snappingaway.
17
Loading ...
Loading ...
Loading ...