Loading ...
Loading ...
Loading ...
8
Before Setting Surface Controls
Check burner cap placement before operating the
surface burners
To prevent flare-ups and avoid creation of
harmful by-products, do not use the cooktop without all burner
caps properly installed to insure proper ignition and gas flame
size.
It is very important to be sure that all surface burner caps and
burner grates are properly installed and in the correct locations
BEFORE
operating the cooktop burners.
Important:
• Always keep surface burner caps in place whenever using a
surface burner.
• When placing the burner caps, be sure that all burner caps
are seated firmly and rest level on top of burner heads.
• For proper flow of gas and ignition of burners DO NOT
allow spills, food, cleaning agents or any other material to
enter the gas orifice port opening.
• On round style burners, the burner cap lip (Figure 1) should
fit snug into the center of burner head and rest level. Refer
to Figure 2for correct and incorrect burner cap placement.
• Once in place, you may check the fit by gently sliding the
burner cap from side to side (Figure 3) to be sure it is
centered and firmly seated. When the burner cap lip makes
contact inside the center of the burner head you will be
able to hear the burner cap click.
• Please note that the burner cap should NOT move off the
center of the burner head when sliding from side to side.
Check and be sure that all oval style (some models) burner
caps are correctly in place on oval burner heads.
Figure 1: Burner cap on burner head
Figure 2: Correct placement (L) Incorrect placement (R)
Figure 3: Moving cap gently until seated properly
Burner cap lip
Burner cap
Burner head
Correct burner cap
placement
Incorrect burner cap
placement
Loading ...
Loading ...
Loading ...