Loading ...
Loading ...
Loading ...
15
Setting Oven Controls
Setting the Clock
When the appliance is first powered up,
12:00 will flash in the
display (Figure 14). The time of day must first be set before
operating the oven.
1. Press .
2. Enter 1 3 0 using numeric keys.
3. Press
Important note:
The clock cannot be changed when a Cook Time, Self Clean,
Delay Start or cooking feature is active.
Setting Timer
The minute timer lets you to track your cooking times without
interfering with the cooking process. The timer may be set
between 1 minute and 11 hours and 59 minutes.
To set timer for 5 minutes:
1. Press Timer Set/Off.
2. Enter 5 using numeric keypad
3. Press to start timer.
To cancel the timer when active press
Timer Set/Off again.
Important note:
• The timer does not start or stop the cooking process. It
serves as an extra minute timer in the kitchen that will beep
when the set time has run out. The timer may be used alone
or while using any of the other oven functions.
• The timer will display hours and minutes until 1 hour
remains. When less than 1 hour remains, the display will
count down in minutes and seconds. Once the timer has less
than 1 minute remaining only seconds will display.
• When the timer is active during a cooking process, the
minute timer will show in the display. To view the informa-
tion of any other active oven function, press the key once
for the other function to view the status.
Add 1 Minute
Use
Add 1 Minute to set additional minutes to the timer. Each
press of the key will add 1 additional minute. If Add 1 Minute is
pressed when the timer is not active, the timer will activate and
begin counting down from 1 minute.
To add 2 minutes to the timer:
Press
Add 1 Minute twice.
Setting 12 or 24 hour display mode
The clock display allows a choice between 12 or 24 hr modes.
The factory pre-set clock display mode is 12 hours.
To set 12 or 24 hour display mode:
1. Press and hold for 6 seconds.
2. Press Self Clean to toggle between 12 Hr day or 24 Hr day
display modes.
3. Press to accept choice.
Changing between continuous bake setting or 12-Hour
Energy Saving feature
The oven control has a factory preset built-in 12 Hour Energy
Saving feature that turns off the oven if the oven is left on for
more than 12 hours. The oven may be programmed to override
this feature to continuously bake.
To change between continuous bake or 12-Hour Energy Saving
feature:
1. Press and hold Timer Set/Off for 6 seconds. 12 Hr OFF
should appear in the display.
2. Press Self Clean to toggle between 12 Hour OFF or Stay On
feature.
3. Press to accept choice
Figure 14: Display showing 12:00 when oven is first powered up
Figure 15: Clock set for 12 hour operation
Figure 16: Clock set for 24 hour operation
Figure 17: 12 Hour operation Figure 18: Continuous operation
Loading ...
Loading ...
Loading ...