Loading ...
Loading ...
Loading ...
4
ACCESSORY INSTALLATION BEFORE OPERATING
UNPACKING AND CLEANING THE DRINKS FRIDGE
● Remove the exterior and interior packing materials.
● Let the appliance stand upright for approximately 2 hours before connecting it to the power
source, which helps to reduce the possibility of a cooling-system malfunction from handling
during transportation.
● Use a soft cloth to clean the interior surface with lukewarm water.
● Install the door handle provided with the appliance by following these steps:
1. Remove the gasket at the inner side of the door
to expose the two screw holes.
2. Install the handle tightly with the screws
and washers provided.
3. Tidy and restore the gasket.
LOCK & UNLOCK THE DOOR (FOR OPTION)
● Lock is fitted and key is attached in packing with this Manual.
● Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock it, please
follow the reversed operation. Please keep key in safe space.
OPERATION
WORKING CLIMATE
● The appliance is designed for operating from SN to T climate (see below climate class chart). It
is recommended to maintain the ambient around 22-25°C which helps the appliance work with
low power consumption.
● If the ambient temperature is above or below the designed climate range, the performance of
the unit may be affected. For example, the appliance operating in extreme cold or hot conditions
may cause interior temperatures to fluctuate, and the temperature set 1-18°C may not be
reached
sometimes.
Climate Class Ambient Temp.
SN
10 - 32 °C
N
16 - 32 °C
ST
18 - 38 °C
T
18 - 43 °C
G a s k e t
F la t Washer
H a n d le
Locker Washer
S c r e w
Door F r a me
Loading ...
Loading ...
Loading ...