Loading ...
Loading ...
Loading ...
OTHER SAFETY WARNINGS
,i, Maintain the unit with care.
All service, other than the maintenance procedures described in
this manual, should be performed by a Sears or other qualified
service dealer.
Never remove, modify or make inoperative any safety device
furnished with the unit.
Before inspecting, servicing, cleaning, storing, transporting or
replacing any parts on the unit:
1. Stop the unit.
2. Make sure all moving parts have stopped.
3. Allow the unit to cool.
4. Disconnect the spark plug wire.
Secure the unit while transporting.
Never store the unit with fuel in the tank, inside a building where
fumes may reach an open flame (pilot lights, etc.) or sparks
(switches, electrical motors, etc.).
Store the unit in a dry place, secured or at a height to prevent
unauthorized use or damage. Keep the unit out of the reach of
children.
Never douse or squirt the unit with water or any other liquid.
Keep handles dry and clean (free from debris, oil and grease).
Clean the unit after each use. Refer to Cleaning and Storage. Do
not use solvents or strong detergents.
Keep these instructions. Refer to them often and use them to
instruct other users. If you loan this unit to others, also loan
them these instructions.
SAVE THESE INSTRUCTIONS
,, SAFETY & iNTERNATiONAL SYMBOLS,
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's
manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
, SAFETY ALERT SYMBOL
_ !ndicates danger I Waining or cauti0n: MaY be used in
i ;ira . conjunction with other symbols or pictographs.
O o READ OPERATOR'S MANUAL
WARNING: Readtheoperator's
manual(s) and follow a!! warnings and safety
instructionsl Failure to do so Can reSult in Serious
. injuryto the operator and/or bystanders.
4tii " WEAR EYE AND HEAR'NG PROTECT'ON
oWsiseAccanRcaN!Ngi :!:OuW_ _;:iteS :rid
! n;i ev i Y n] Y cl aing :
Wear eye protection meeting Cur[ent ANSI/ISEA
Z871! standa[ds and ear protection when operating
this unit. Use afull face shield when needed.
%, UNL EDFUEL
AlwaYs use Clean, fresh unleaded fue!:
_,_,# .
.OiL
_L.5/J
. Refer to operator S manual for the proper type of Oil.
• DO NOT USE E85 FUELIN THIS UNIT
WARNIN G::"! has been ploven tha;
c_Onmtaaignieng,g[:ate rnethanndlOof_ _thhtnwOlrWilnlt'_.ke!y
SYMBOL MEANING
...... _ ' ON/OFF STOP CONTROL
| oN/ START/ RUN
O ' ON/OFFSTOP CONTROL
OFF or STOP
' PRIMER BULB
Push primer bulb, fully and slowly, 10 times.
" _ " CHOKE CONTROL
1. " FULL choke position
I 2. • PARTIAL choke position
3. • RUN choke position
,__, , THROWN OBJECTS AND ROTATING CUTTER CAN
_Q
//_ CAUSE SEVERE iNJURY
WARNING: Smaobjectscanbe
propelled at high speed, causing injury. Keep away
. from the rotating rotor.
A , KEEP BYSTANDERS AWAY
WARNING: Keepabystanders
especia ly children and pets, at least 50 feet (15 m)
. from the operating area.
' HOT SURFACE m
WARNING. DOnot touch a hot muffler
0 or cylinder. You may get burned. These parts get
extremely hot from operation. When turned off they
remain hot for a short time.
._' SHARP BLADE
Sharpb,adeontrimmer
attachment shield. To prevent serious injury, do not
• touch the line cutting blade.
Loading ...
Loading ...
Loading ...