Loading ...
Loading ...
Loading ...
If power cord or other parts of this machine become damaged or faulty, please
contact a
technician to have it repaired.. Do not attempt repairs by yourself as this
may cause personal harm or void warranty.
Safety precautions
Please install and adjust the machine according to the directions contained in this
manual. It is very important to follow these directions for the safe operation of the
machine, and to ensure your machine operates correctly.
Installation & Adjustment
4
Back
Front
Screw
Bottom plate Carpet
Installing the bottom plate
The purpose of the bottom plate is to su ppress noise
from the washing machine during operation.
Steps:
2. Place the plate onto the bottom of the
machine.
3. Use a screwdriver to tighten the screw ( in accessory
bag) securing the panel to
the bottom of the washer.
4. Once the screw is tight and the panel
is secure, return
the washer to its standing position.
1. Tilt the machine backwards against a wall. (ensure that the
machine is well supported)
The new hose-sets supplied with the appliance are to be used and the old hose-sets
should not be reused.
Note: The washing machine has ventilation openings in the base, the product must not be
placed on a carpeted surface.
Please do not to remove the pump filter cap situated at the
bottom rear of the product in any situation as water remaining
in the product will flow directly out of the product.
In the event of a blockage or a failure to drain, please contact
the customer care centre for assistance.
The pump filter cap is only to be removed by a trained service
technician.
Pump filter cap
Loading ...
Loading ...
Loading ...