Loading ...
Loading ...
Loading ...
Make sure your extension cord is in good condition. When using an extension cord, be sure to
use one heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.)
of at least 14 is recommended for an extension cord 50 feet or less in length. If in doubt, use
the next heavier gauge. The smaller the gauge number, the heavier the cord. An undersized
cord will cause a drop in line voltage resulting in loss of power and overheating.
Do not point the blower nozzle in the direction of people or pets.
Never place blower on any surface, except a hard, clean surface when motor is running.
Gravel, sand, and other debris can be picked up by the air inlet and thrown at the operator or
bystanders, causing possible serious injuries.
Never run the unit without the proper equipment attached. Always ensure the blower tubes are
installed.
When not in use, blower should be stored indoors in a dry, locked up place—out of the reach
of children.
Maintain tool with care. Keep fan area clean for best and safest performance. Follow instructions
for proper maintenance.
Do not attempt to clear clogs from tool without first unplugging it.
Do not pull or carry by cord, use cord as a handle, or pull cord around sharp edges or corners.
Keep cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
To reduce the risk of electrical shock, do not expose to rain, do not use on wet surfaces.
Store indoors.
If the power supply cord is damaged, it must be replaced only by the manufacturer or by an
authorized service center to avoid risk.
Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
Save these instructions. Refer to them frequently and use them to instruct others who may use
this power tool. If you loan someone this power tool, loan them these instructions also.z
SPECIFIC SAFETY RULES
5
Loading ...
Loading ...
Loading ...