Loading ...
Loading ...
Loading ...
7
676
Rear Panel
1
2 3 4 6 75
1. Power Connector
Connect the included IEC power cord to this connector and the other end to an available AC outlet.
2. Fuse Drawer
This drawer houses the main power fuse as well as a replacement fuse, see ‘Replacing The Fuse’ on page 27
for further information.
3. Compressor/Limiter Line Output Connectors
This output carries the signal post-compressor/limiter. Both 1/4” and XLR balanced outputs are provided. The
COMPRESSOR / LIMITER output can be used by itself or along with the PREAMP output for parallel compression
applications, see ‘Parallel Compression’ on page 18 for additional information.
4. Compressor Sidechain Insert Connector
Connect an insert cable to this unbalanced connector to patch in another device for processing the signal feeding
the compressor’s detector circuit. For example, an external EQ could be connected and used for frequency-weighted
compression, such as de-essing. See ‘Sidechain Application’ on page 21 for more information on using this
connector.
5. Preamp Line Output Connectors
This output carries the signal post EQ and pre compressor/limiter. It provides a slightly more minimalistic signal path
than the COMPRESSOR / LIMITER output. Both 1/4” and XLR balanced outputs are provided. The PREAMP output
can be used by itself or along with the COMPRESSOR / LIMITER output for parallel compression applications, see
‘Parallel Compression’ on page 18 for additional information.
6. Preamp Insert Connector
Connect an external signal processor to this unbalanced connector to process the signal just after the preamp section
and before the EQ.
7. Mic Input Connector
Connect a microphone or stage D.I. box to this balanced XLR input connector.
Loading ...
Loading ...
Loading ...