Loading ...
Loading ...
Loading ...
The product stops
autom atically while in use.
1. The voltage is too low.
2. There are too many food
materials in the product.
3. The pushin g was rod is
pushed too violently.
4. The m otor is under
temperature protection.
1. C h eck whether the voltage is too low.
2. D isconnect the power supply and rem ove th e surplus
food m aterials.
3. G ently push the pushin g rod.
4. Stop th e product and start it again 20 to 30 m inutes
later.
There is a lot of residue in
the juice.
1. The juice strainer is
damaged.
2. There is a lot of residue in
the middle ring.
1. Replace the juice strainer.
2. C lean th e middle ring.
The product has abnormal
vibration or big noise.
1. The juice strainer is not
correctly installed, resulting in
poor runnin g balance.
2. The product is not steadily
placed or the foot pad has
fallen off.
3. The voltage is too high; or
4. There are many food
materials in the product.
1. Install the juice strainer correctly.
2. P lace the product steadily or in stall the foot pad
correctly.
3. C heck whether the voltage is too high.
4. D isconnect the power supply and rem ove th e surplus
food m aterials.
There is very little juice.
1. There is a lot of residue in
the middle ring.
2. The pushin g rod was
pushed too violently.
1. C lean the m iddle ring.
2. G ently push the pushing rod.
The cutter holder is
seized.
The cutter holder is wound or
seized by food m aterials.
D isconnect the power supply, take out the food
materials and cut them into smaller blocks.
N otes:
The table above introduces the com mon faults and their cause analysis and elim ination methods. F or
other faults, contact our custom er service department or have the product repaired by a designated
service center directly. D o not dism antle or repair the product by yourself.
Facebook: @sifenefans
Message: @sifenefans
Email:[email protected]