Loading ...
Retract pull-out hose (1) up through faucet body,
until the pull-out hose fitting is flush with the bottom
of shank (2). Do not pull hose fitting past the shank.
Insert faucet body through the hole in sink.
Note: Do not feed the pull-out hose (1) back down
through the spout until step 4.
Install plastic washer (3) and metal washer (4)onto
the threaded mounting shank. Thread nut (5) onto
mounting shank. Do not overtighten.
WARNING: Please carefully read and properly follow the instructions for installation found in this manual.
Shut off water supplies.
Before installation, assemble the hand spray (1) to the
pull-out hose by turning hand spray clockwise and
remove quick connect assembly (2) from the free end
of pull-out hose.
If installing the faucet with the large escutcheon, begin
with step 2A. If installing the faucet with small
escutcheon, begin with step 3.
Retract pull-out hose (1) up through faucet body, until
the pull-out hose fitting is flush with the bottom of shank
(2). Do not pull hose fitting past the shank. Insert faucet
body through the hole in 3 hole escutcheon.
Note: Do not feed the pull-out hose (1) back down
through the spout until step 4.
From underneath sink, hand tighten mounting nuts (3).
Install plastic washer (4) and metal washer (5) onto the
threaded mounting shank. Thread nut (6) onto mounting
shank. Do not overtighten.
6
4
5
3
1
2
STEPS:
2
1
4
5
3
Ø1 3/8" (Ø35mm)
2
1
Before installation, screw bolts to the 3 hole escutcheon.
Insert escutcheon assembly through the gasket and the
holes of the sink.
3-Ø1 3/8" (Ø35mm)
Loading ...
Loading ...
Loading ...