Loading ...
Loading ...
Loading ...
7
2. See Fig. 4. Mark the position of the hole on the drain pipe and drill a 1/4” hole through one side of
the drain pipe. There is a piece of self-adhesive sponge provided. Glue this sponge to the inside of the
saddle, this will cushion any gap between the saddle and the pipe. Make sure the hole on the sponge is
thoroughly punched out, and is aligned to the hole on the saddle.
3. See Fig. 4A, 4B. Make sure to align the drain saddle hole to the drilled hole perfectly. Mis-aligning these
two holes will block the waste water and cause membrane damage. Attach the drain saddle to the drain
pipe and tighten the two screws.
Fig. 4
Fig. 4A
Fig. 4B
Loading ...
Loading ...
Loading ...