Loading ...
Loading ...
Loading ...
_ Connecting to water supply line
- Shut off the main water supply line and turn the Ice
maker to the off position.
- Locate the nearest cold drinking water line.
- Follow the instructions in the ice maker installation kit.
1. Cold Water line
2. Pipe Clamp.
&Copper (or Plastic) line
4.Compression Nut
5.Compression Sleeve
6.Shut Off Valve
7.Packing Nut.
5 4
_ Connect the water line to the refrigerator.
1) Slip the compression nut through the provided
plastic tubing.
2) Tighten the compression nut onto the 1/4"
compression fitting.
(_F Do notovertighten the compressionnuL
NOTE
, Using Copper Tubing
- Slip the compression nut and ferrule on
copper tubing as shown.
, Using Plastic Tubing
- Insert the molded end of the plastic tubing
into the compression fitting.
3) Tighten the compression nut onto the com-
pression fitting.
4) Turn water on and check for any leakage.
C_
NOTE
Ferrule
(Not
Refrigerator ]
,,°'TT'-.
_._.__ CompressionNut(1/4")
\ (Provided)
l_-----,-- CompressionFitting
_¢ i (Provided)
m
0ressionNut(1/#')
(NotProvided)
PlasticTubing
Co (NotProvided)
(NotProvided)
I Household Water Line I
Waterline must be connected to drinkable water Only.
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnecting.
_ Check the water supply line
Connect the water pipe with coupler and tap.
- Close the main water tap.
- Connect coupler "A" to the tap.
- Every joint should be protected with sealing tape.
If the coupler does not fit on the current tap; go to
the nearest authorised Service dealer and purchase
the right couplers fittings:
The water line must be connect-
ed to the cold water pipe. I
If it is connected to the hot I
water pipe, it may. cause the puri- I
tier to malfunction. I
COUPLER "A"
TAP
27
Loading ...
Loading ...
Loading ...