Weber K46010924 Spirit E-210 Black LPG BBQ

User Manual - Page 9

For K46010924.

PDF File Manual, 12 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
9
WWW.WEBER.COM
®
9
(1)
(2)
(3)
CHECKING THE FUEL LEVEL IN YOUR TANK
Check the fuel level by viewing the color indicator level line on the side of the tank scale.
1) Empty
2) Medium
3) Full
REFILLING THE LPG CYLINDER
We recommend that you refi ll the LPG cylinder before it is completely empty.
To refi ll, take LPG cylinder to a “Gas LPG” dealer.
Removal of the gas supply cylinder
1) Shut off gas supply.
2) Disconnect hose with regulator from the cylinder.
3) Exchange empty cylinder for a full cylinder.
IMPORTANT NOTE: Place dust cap on cylinder valve outlet
whenever the cylinder is not in use. Only install the type of
dust cap on the cylinder valve outlet that is provided with
the cylinder valve. Other types of caps or plugs may result
in leakage of LPG.
(1)
(2)
GAS INSTRUCTIONS
1
2
3
5
7
6
4
SPIRIT E/SP-
210 & 310
*The grill illustrated may have slight
differences than the model purchased.
MAIN BURNER LIGHTING
LIGHTING
Summary lighting instructions are on the control panel.
DANGER
Failure to open the lid while igniting the barbecue’s burners,
or not waiting 5 minutes to allow the gas to clear if the
barbecue does not light, may result in an explosive fl ame-up
which can cause serious bodily injury or death.
Crossover
®
Ignition System
Note: The Crossover
®
ignition system ignites the Front burner with a spark from the
igniter electrode inside the Gas Catcher™ ignition chamber. You generate the energy
for the spark by pushing the Crossover
®
ignition button until it clicks.
WARNING: Check hose before each use of barbecue for
nicks, cracking, abrasions or cuts. If the hose is found
to be damaged in any way, do not use the barbecue.
Replace using only Weber
®
authorized replacement hose.
Contact the Customer Service Representative in your
area using the contact information on our web site. Log
onto www.weber.com
®
.
MAIN BURNER LIGHTING
1) Open the lid.
2) Make sure all burner control knobs are turned OFF. (Push control knob down and
turn clockwise to ensure that it is in the OFF position.)
3) Turn the cylinder on by turning the cylinder valve anticlockwise.
WARNING: Do not lean over the open barbecue. Keep your
face and body at least one foot away from the matchlight
hole when lighting the barbecue.
4) Push Front burner control knob down and turn to START/HI.
5) Push the Crossover
®
ignition button several times, so it clicks each time.
6) Check that the burner is lit by looking through the matchlight hole on the front of the
cooking box. You should see a fl ame.
WARNING: If the burner does not light, turn the Front burner
control knob to OFF and wait 5 minutes to let the gas clear
before you try again or try to light with a match.
7) After the FRONT burner is lit you can turn on the other burner or burners.
Note: Always light the FRONT burner fi rst. The other burner or burners ignite from the
FRONT burner.
TO EXTINGUISH
Push down and turn burner control knob(s) clockwise to the OFF position, then turn gas
supply OFF at the source.
OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...