Loading ...
Loading ...
Loading ...
Fig. 11-1
LOCK
UNLOCK
LOCATION PREPARATION
Prepare a fl at, level surface capable of supporting
the weight of the stand-alone grill and convenient to
the gas supply if connecting to a gas line.
WHEELS AND CASTERS
To lock a caster press down on the left lever until it
stops and the caster will not turn. To unlock, press
down on the right lever.
CONNECT THE GAS SUPPLY
Always ensure the orifi ces and regulator (if
equipped) are set for the gas type your unit is
to be installed to.
For connecting a propane unit to a portable
propane tank, read the safety warnings and follow
the instructions in the section SAFE USE AND
MAINTENANCE OF PROPANE GAS CYLINDERS.
For household propane or natural gas units:
1. Turn OFF the gas supply at the source. The
quick disconnect hose is pre-installed on the
valve manifold at the manufacturer. Run the
hose through the hole in the bottom rear of the
stand-alone unit, to the gas supply. Connect
the
1
/
2
" NPT socket at the end of the hose to
the gas supply. Use pipe joint compound that is
resistant to all gasses on the male pipe fi tting
and tighten securely. DO NOT use pipe joint
compound to connect the fl are fi ttings.
2. Turn all burner valves to the OFF position. Turn
the gas supply on. Then carefully check all gas
connections for leaks with a brush and soapy
water before lighting. NEVER USE A MATCH
OR OPEN FLAME TO TEST FOR LEAKS.
11
INSTALLATION
REV 0 - 1412011100
L-C2-438
Loading ...
Loading ...
Loading ...