Loading ...
Loading ...
Loading ...
· All Auto program are on hold during the rain delay.
If you want to cancel the Rain Delay, press " "
button 5s again.
· Rain delay allows you to postpone watering for 1
day and up to 7 days.
Please make sure the timer is in
Auto Run state.
Hold and press " " button 5s until the " " appears
on the screen. If you want to cancel the " ", press
" " button 5s again.
Children Lock
Do not use your timer when the air tempera-
ture is below 40℉(4.5℃), the timers should
be removed from the hose faucet and stored
indoors to avoid potential frozen damage.
Filter can trap dirt particles, please clean
filter regularly and replace if worn.
Do not mix alkaline, standard (carbon-zinc),
or rechargeable (nickel cadmium) batteries.
Used up or dead batteries must be removed
from the timer and disposed of properly.
Please replace batteries when the low
battery indicator appears the display. When
replacing the power unit, please make sure
that the water timer is dry.
1. Remove the tray on the back of the timer by
sliding or pulling it out.
2. Insert two AA (1.5V) alkaline batteries and
replace the tray.
· Please do not insert rechargeable batteries to
avoid low voltage.
· The display will turn on for 3 seconds when
power on.
Please make sure the timer is in Auto Run state.
1. Hold and press " " button 5s until the appears
on the screen.
2. Press " " button to set the duration of the
delay from 1 to 7 days.
3. Press " " button or no operation 10s to save
changes.
Rain Delay
· The pump timer don't have programmable
memory, it need to reset once power off.
Note:
5. Precautions
3. Battery Installation
Note:
6. FAQ
Two batteries loaded are new 1.5V AA alkaline
batteries, make sure the batteries are properly placed
in the battery box.
A1:
Q1: The LCD screen does not display anything
when the batteries are installed.
Clock should be set to the correct time.
Start time is set to desired the time.
Rain Delay is on.
OFF mode is on.
The batteries are low.
The faucet is turned off.
A2:
Q2: Water does not come on at preset time.
Check if:
The O-ring is connected correctly to the hose tap.
The connection outlet or water pipe is broken.
The faucet and water pipe has a different thread.
If necessary, please use an appropriate adapter or
PTFE tape.
A3:
Q3: The hose tap connection/outlet leaks.
Check if:
The timer have one year warranty, if you have any
questions, please feel free to contact via
The following conditions are not included in the warranty:
-Problems occur due to its use for other purposes, or
improper use or use of components not supplied by
Diivoo.
-Damages caused by improper use, for example, wrong of
power supply, artificial damage, etc.
7. After-sales Service
2
3
Inlet/Outlet Thread
Working Water Pressure
Working Temperature
Rain Delay Time
Waterproof
Included in the Box
NH3/4"
7.25 psi -116 psi
40.1˚ F-113˚ F
1 day and up to 7 days
IPX5
Watering Duration
00:01-23:59
Watering Frequency
1min, 5min, 15min, 30min,
1H, 2H...... 23H
Water Timer,
1/2" inlet adapter,
Threaded connector,
2 x Extra Rubber Washers,
Thread Seal Tape,
Instruction
4. Specification
If your are gravity feed system such as rain barrel system,
then it won't work and will keep low water pressure.
Gravity feed has no real pressure when dealing with a rain
barrel. It needs pressure measuring.
A4 :
Q4: Why is the water valve out of little water?