Loading ...
Loading ...
Loading ...
|
39
Lighting Burners
All burners are ignited by electric ignition.
There are no open-ame, “standing” pilots.
Work-top Burners
To light the surface burners, push and turn
the appropriate control knob anticlockwise
to maximum ow position
. This control
is both a gas valve and an electric switch.
When gas is permitted to ow to the
burners, the electric igniters start sparking.
On all surface igniters you should hear a
“clicking” sound. If you do not, turn off the
control and check that the unit is plugged in
and that the fuse or circuit breaker is not
blown or tripped.
Within a few moments, enough gas will have
traveled to the burner to light. When the
burner lights, turn the burner control to any
position from maximum
to minimum
ow position to adjust the ame size. Setting the proper ame height for the desired cooking process
and selecting the correct cooking vessel will result in superior cooking performance, while also saving time
and energy.
Power burner with simmer
The range is provided with a powr burner with simmer, a special burner featuring a very high exible range
of cooking settings: from 750 Btu/h for simmering, melting or steaming rice, to 18000 Btu/h for the most
powerful performance.
To light the surface burners, push and turn the appropriate control knob anticlockwise to maximum power
of inner ring.
The inner ring lights at its maximum power. Then you can continue to use only the inner ring and adjust the
ame power by turning the control knob from
to position. If you need to light on also the external
ring, continue to turn anticlockwise the knob and make a little pressure on it in order to cross the lock
located after the minimum power position of internal ring. The external burner lights on; ame is adjustable
turning the knob from
to position.
Worktop burner knob + simmer
OFF
= Closed position
= “Full on” position
internal ring
= “Full on” position
esternal ring
Burners Operation
Loading ...
Loading ...
Loading ...