Loading ...
Loading ...
Loading ...
CARE AND MAINTENANCE
Cleaning Your Appliance
Turn off the power, unplug the appliance, and remove all items, including shelves.
Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of
baking soda to a quart of water).
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning the area where the controls are located,
or any electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a
clean soft cloth.
Do not use steel wool or a steel brush on the stainless steel.
Wipe off the condenser (on the back of the unit) regularly to keep it well ventilated.
Keep the door gasket clean. The gasket can be removed and then remounted after cleaning. Putting
a little talcum powder on the magnetic surface of the gasket will prolong its service life.
CAUTION:
Failure to unplug the appliance during cleaning could result in electrical shock or other personal injury
.
Bulb Replacement
When the bulbs behind the lighted logo panel must be replaced,
1. Remove the left side cover of the light-box. (You'll need a Phillips screwdriver.)
2. Slide out the logo panel.
3. Replace the bulb or bulbs and reinsert the logo panel.
4. Replace the left side cover.
NOTE: Replacement bulbs can be purchased directly from SUMMIT by calling us at 1-800-932-4267 or
by going to our website at www.summitappliance.com/support. Have the model number, SCR1275,
handy.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is going to be off for a
longer period of time, you need to take the proper steps to protect the contents.
Vacation Time
Short vacations: Leave the appliance operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all items and turn off
the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the
door open slightly, blocking it open if necessary.
9
Loading ...
Loading ...
Loading ...