Loading ...
Loading ...
Loading ...
User instructions
15
"Flexi Tabs
"
(on some models only)
The option is optimised for use of detergents which are complete with
salt and rinse aid, known on the market as, "triple action", etc. With this
option activated, any salt and rinse aid If you wish to use detergents
which already contain salt and rinse aid already in the dishwasher will
not be used.
With short programs, because there is less time for them to dissolve,
tablets may fail to wash effectively and undissolved residues may be left.
Powder detergents are more suitable for these programs.
- N.B.: even with the "Flexi Tabs" option selected, the
regenerating salt/rinse aid lights will still stay on if their
containers are empty.
IMPORTANT: when no longer required, the option must be disabled
(the light goes out).
If the water hardness has been set on a value above H3, and the “Flexi
Tabs” option is activated, the relative light flashes, warning of a setting
error. Multi-function products are not suitable for use with very "hard"
water; this does not prevent the use of the option, but the washing
results might not be of the best.
ULTRA CLEAN
The "ULTRA CLEAN" program prolongs the final hot rinse to ensure a
further reduction in the bacteria level. If the temperature in the tank falls
during this stage of the program (e.g. because the door is opened or due
to a power blackout), the light of the option and the program lights (2) flash
to warn that the additional washing phase has not been completed
successfully. This does not mean that the wash program has been less
effective than usual.
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load.
Loading ...
Loading ...
Loading ...