Loading ...
Loading ...
Loading ...
7
PREPARATION
BACK PANEL INFORMATION
■ Image shown may differ from your set.
POWER CORD SOCKET
This set operates on an AC power. The volt-
age is indicated on the Specifications page.
Never attempt to operate the set on DC
power.
CONTROL (TX, RX)
Connector to compensate the luminance dif-
ference.
Connect using LAN Cable inside the
Accessory box.
Connect LAN Cable to TX, and connect to
RX connector of other sets.
RS-232C INPUT(CONTROL&SERVICE)
PORT OUT
For control the another set, connect a
RS-232C Cable from RS-232C out port to
another set’s RS-232C input port.
IN
Connect to the RS-232C port on a PC.
DVI OUT, IN
DVI (VIDEO) signal to DVI port with DVI
cable.
USB Input (For service)
Used for software updates.
HDMI/DVI
Connect an HDMI/DVI signal to HDMI/DVI.
RGB OUTPUT
You can watch the RGB signal on another
set, connect RGB OUTPUT to another set’s
PC input port.
RGB INPUT
Connect the set output connector from a PC
to the appropriate input port.
AUDIO (RGB/DVI)
1/8" headphone jack for analog PC audio
input
REMOTE CONTROL IN
For a wired IR Receiver.
COMPONENT INPUT
Connect a component video/audio device to
these jacks.
Speaker Ports
Connect to optional external speaker(s).
1
2
3
4
6
7
8
9
5
DVI OUT DVI IN
(SERVICE ONLY)
USB
HDMI
RGB OUT
RGB IN
SPEAKER
(8)
TX
RX
CONTROL
AC-IN
DVI OUT DVI IN
RGB OUT
RGB IN
SPEAKER
(8)
(SERVICE ONLY)
USB
HDMI/ DVI
3
1
5 6 7 8 94
2
Loading ...
Loading ...
Loading ...