Loading ...
Loading ...
Loading ...
PROBLEH CAUSE CORRECTION
"E7", "E8", "E9" * The control has regis- * For toll-free telephone support in the U.S.
is displayed tered an error code. and Canada: 1-800-374-4432
on control.
"Sb"is displayed _ The control is in _ Pressing the CONTROL LOCK and TEMP
oncontreL ' Sabbath Mode. - MODE keys to exit Sabbath Mode.
SOUND AND NOISE
Louder sound '0 Appliance operates at o This is normal: Sound will level off or dis'
levels whenever higher pressures during appear as appliance continues to run.
appliance is on. the start of the ON cycle.
Popping orcrack- • Metal parts undergo ex- • This is normal. Sound will level off or dis-
ing sound when pansion and contraction, appear as appliance continues to run.
compressor as in hot water pipes.
_lln_ On,
Bubbling or gur- • Refrigerant (used to cool • This is normal.
gling sound, refrigerator) is circulating
throughout the system.
Vibrating or * Appliance is not levell It • Level the appliance. Referto
rattling noise, r0cks on the floor when' Leve!ing,f section,
. Ensure floor can adequately support the
appliance. Level the appliance by putting
wood or metal shims under part of the
appliance.
. Appliance is t0uching , Re.level appliance or move appliance
' the wall: slightly. Refer to "Leveling,' !n Lhe IN-
- _ STALLATION section.
WATER / MOISTURE / FROST INSIDE APPLIANCE
Moisture forms , Weather is hot and humid, ' This is normak
on inside appli, which increasesinternal
ante walls, rate of frost buildup. I
, Do0r iss!ightly openl , See!_DOOR PROBLEMS";
• Door is kept open too long. • Open the door less often:
ODOR IN APPLIANCE
Odors in , Interior needs to be . ' Clean interior with sponge, warm water.
appliance,, cleaned ! I and baking s0daiRep!ace
, Foods with strong odors - Cover the food tight!Y.
• are in the appliance. "
DOOR PROBLEMS
Door will' ,Appliance is not level: It ' This condition can force the cabinet out
not close, rocks on the floor when of square and misa!ign the door. Refer to
it !S moved Slight!y: _!Level!ng'i sect!°n:
Floor is uneven or weak. -Ensure floor can adequately support appli-
' ance. Level the appliance by putting wood
• . or metal shims under part of the appliance.
LIGHTING PROBLEMS
Light bulb is ,The light bu!b isburned , Follow directions Under INTERIOR
not on, out LIGNTlrNG section.
, No electric current is ' See "Appliance does not run,.
reach ng the appl ance,
• COntrol iS in Sabbath * Depress TEMP MODE key and CONTROL
mode (Sb is displayed on LOCK key for 3 seconds.
• control). "
8
Loading ...